Categories
- Solders & Fluxes
- Soldering & Rework Equipment
- Production & Rework Consumables
- Maintenance Chemicals
- Conformal Coatings & Lacquers
- Potting & Thermal Compounds
- Dispensing Equipment & Consumables
- Static Control Products
- Adhesives & Tapes
- IPC Soldering Training
- Fume & Chemical Extraction
- Mobile Phone Repair Essentials
- PCB Inspection
Chemtools
-
Dross Reducing Powder
$52.70 – $146.30SKU: CT-DRP
Dross Reducing Powder is a white, inorganic powder which removes oxides from the solder surface, cleaning it to allow regeneration of usable metal and decreasing the amount of dross for disposal. It extends the use of solder by encapsulating metal oxides, and is recommended for tin/lead solder pot temperatures of 235°C through to 260°C.
Dross Reducing Power reduces dross in solder pots and can be used in wave soldering and still solder baths. It contains no fatty acids or mineral oils and no chlorides, ensuring no interference with board or component cleanliness. -
Fibreglass Eraser Pen
$15.70SKU: OK-AP1
This versatile Glass Fibre Pencil is an eraser pen is made from fine fibreglass threads. It is perfect for cleaning, polishing, and burnishing applications on electrical and electronic equipment.
Common uses include rust removal, contact cleaning, cleaning of pads, de-burring metal parts, and many more.
-
Heat Sink Compound Silicone Free
$9.40 – $22.80SKU: CT-R00
Chemtools® R00 Silicone Free Heat Sink Compound is a white thermally conductive grease which is specially formulated for use in a silicone free environment, where silicone contamination may hurt solderability and increase solder defects. This non-crosslinked thermal compound does not dry out and is commonly used to improve heat flow between heat sinks and heat generating electronic devices such as LED’s, CPU’s and motors.
Heatsink Compound is designed to dissipate and efficiently transfer heat away from the heat generating component. It is a specifically formulated low bleed and low evaporation formula for use on applications where thermal transfer is required without electrical conductivity.
As a re-workable, removable, and non-toxic interface between heatsinks and heat sources, Heatsink Compound can be easily applied to quickly eliminate air gaps and safely maximise and aid the transfer of heat. -
Heatsink Compound
$5.50 – $35.80SKU: CT-R001-SI
Heatsink Compound is designed to dissipate and efficiently transfer heat away from the heat generating component. It is a specifically formulated low bleed and low evaporation formula for use on applications where thermal transfer is required without electrical conductivity.
As a re-workable, removable, and non-toxic interface between heatsinks and heat sources, Heatsink Compound can be easily applied to quickly eliminate air gaps and safely maximise and aid the transfer of heat.
Heatsink Compound 150g Tube
-
Heatsink Compound 1Kg
$45.80SKU: simple-CT-R001-SI-1KG
Heatsink Compound 1Kg
-
Metcal BVX-201 Main Filter HEPA Carbon
$168.50SKU: FM-BVX200
Activated carbon filter for the Metcal BVX-201 Fume Extractor to remove additional gases.
-
Needle Bottle Dispenser
$11.60SKU: FD-21
For the precise application of non-corrosive liquids, this spill proof 59mL polyethlene squeeze bottle is equipped with a blunt stainless steel to eliminate messy spillage, waste, and evaporation.
Needle Bottle Dispenser
-
PCB Resist Touch Up 15ml
$23.80SKU: CT-OA
PCB Resist Overcoat Brush is designed to protect and insulate printed circuit board tracks and components. Its highly effective acrylic polymer formulation protects against dirt, moisture, and fungal growth. The convenient brush applicator is useful for precision applications during rework and repair of solder masks.
PCB Resist Touch Up 15ml Blue
-
Premium Food Grade Anti-Seize Aerosol
$30.60SKU: CT-R23FS-300
DEOX R23 Food Grade Anti-Seize is specially formulated under strict conditions for safe use in the Cosmetics, Beverage, Food, and Pharmaceutical Industries. It prevents galling and high temperature seizing on threaded joints and metal parts, protecting against acids and water-based cleaning products.
R23 has good anti-wear properties, and is fortified with PTFE and anti-corrosion additives. It is odourless, tasteless, non-staining, offers maximum lubrication, and will not harden or drip.
Temperature Range: -50°C to +400°C
Meets Military Specification: MIL-PRF-907F
-
Rapidstick™ Cyanoacrylate Adhesives Primer
$18.90SKU: 8-CAP-150
Rapidstick™ Cyanoacrylate Adhesives Primer is designed to promote adhesion to or between difficult-to-bond low surface energy plastics such as polypropylene, polyethylene, polyolefin, and PTFE. Bond strength may increase by up to 20 times with its use.
-
Acceptability Of Electronic Assemblies Hard Copy Book Revision E
$94.80SKU: IPC-610-H-MANUAL-REV-H
Acceptability Of Electronic Assemblies Hard Copy Book Revision E
-
Requirements and Acceptance for Cable and Wire Harness Assemblies Hard Copy Rev C
$94.80SKU: IPC-620-C-MANUAL-REV-C
Requirements and Acceptance for Cable and Wire Harness Assemblies Hard Copy Book
-
Requirements and Acceptance for Cable and Wire Harness Assemblies Hard Copy Book Rev D
$336.90SKU: IPC-620-D-MANUAL-REV-D
Requirements and Acceptance for Cable and Wire Harness Assemblies Hard Copy Book
-
Silicone Potting Compound Kit
$67.40 – $684.50SKU: PCT-7000GY
High quality, two component Silicone Potting Compound is specially formulated for potting applications in the Electrical & Electronics Industries.
Made from silicone rubber which displays excellent electrical insulation and great shock absorbing properties , it offers good protection against impact damage.
Due to the relatively low viscosity, Silicone Potting Compound will allow complete encapsulation for weather and humidity resistance.
Both supplied components are easily mixed in a simple 1:1 ratio. The cure process is non-exothermic, and the cured elastomer is opaque and moderately hard.
-
Single Ended Stainless Steel Brush
$11.20SKU: 2033
The 2033 is a Horse Hair Brush with Zinc Plated Steel Handle is a utility duster/cleaner and great replacement for throw-away acid brushes that tend to lose fibres.
Handle Length: 4 1/2″ Diameter: 3/8″
Bristle Trim Length: 3/4″ Tuft Diameter: 7/16″ Tuft: Oval
Single Ended Stainless Steel Brush
-
Small Brush Metal Handle
$16.40SKU: 2030
The 2030 Goat Hair Brush with Stainless Steel Handle has strong mechanical fibre clamping for maximum fire retention. Use for fine cleaning and as a fluid applicator.
Handle Length: 3 1/2′”, Diameter: 1/8
Bristle Trim Length: 1/8″”, Tuff Diameter: 1/8″ Tuft: Oval
Small Brush Metal Handle
-
Solder Wick / Solder Braid No Clean
$4.30 – $27.10SKU: WKNC
Solder Wick also known as Solder braid or Solder wick is used most often in the rework and repair of circuit boards and other applications in computers, cell phones or other electronics. It is woven copper that easily let you remove the extra solder from components or pads on the circuit board.
Chemtools wick products made using ultra, oxide-free copper, braided into a weave configuration which maximizes thermal conduction and solder retention. Immediately after braiding, the wick is cleaned in an environmentally friendly process.
Every precaution is taken to ensure that the braid remains oxide-free until it is coated through a proprietary fluxing process using pure type ‘R’ resin flux conforming to all the requirements of Mil-f14256F, Type ‘R’ and ANSI/J-STD-004.All Chemtools desoldering wick are all RoHS compliant and can be used with lead and lead free rework.
-
Soldering Tip Brush Cleaner
$17.90SKU: 2025
The 2025 Soft Brass Brush can be used at the end of each work day to clean soldering/desoldering tips while still hot. It removes flux deposits and other chemical build-up with reduced top longevity and performance without damaging soldering tips.
Handle Length: 7 3/4″, Width: 7/16″
Bristle Trim Length: 7/16″, Dimensions: 1 3/8″ (L) x 1/8 (W)
Soldering Tip Brush Cleaner
-
Vision Engineering Mantis Compact Objective Lens X2
$468.50SKU: MCO-002
Vision Engineering Mantis Compact Objective Lens X2
-
Vision Engineering Mantis Compact Objective Lens X4
$194.80SKU: MCO-004
Vision Engineering Mantis Compact Objective Lens X4