Categories
- Solders & Fluxes
- Soldering & Rework Equipment
- Production & Rework Consumables
- Maintenance Chemicals
- Conformal Coatings & Lacquers
- Potting & Thermal Compounds
- Dispensing Equipment & Consumables
- Static Control Products
- Adhesives & Tapes
- IPC Soldering Training
- Fume & Chemical Extraction
- Mobile Phone Repair Essentials
- PCB Inspection
Chemtools
-
Requirements for Soldered Electrical and Electronic Assemblies Hard Copy Book
$415.80SKU: IPC-J-STD001-H-MANUAL-REV-H
Requirements for Soldered Electrical and Electronic Assemblies Hard Copy Book
-
AeroGun Aerosol Spray Gun Attachment
$13.70SKU: CT-AG-1
AeroGun is a durable and heavy duty ergonomic trigger spray attachment for all standard aerosols. It is a vital dispensing accessory designed to reduce or eliminate injury incurred due to repetitive, continuous, or otherwise excessive use of aerosol spraying. Its full-grip handle turns regular aerosols into professional spray guns, allowing the user better manoeuverability while dispensing paints, lubricants, solvents, or other chemicals.
-
Acrylic Conformal Coating – Aerosol & Bulk
$14.00 – $175.30SKU: CT-ACC
Clearcote Acrylic Conformal Coating is a premium, high performance protectant which offers high dielectric strength for insulation and protection against the
environment, dust, and chemicals. Its fast drying, durable, high gloss finish is specially formulated for protecting PCBs from abrasion and staining and providing ongoing resistance to moisture and fungal growth – particularly when used in harsh environments.Acrylic Conformal Coating contains a UV trace which glows under UV light to confirm coverage across the entire surface area.
-
DCA Silicone Conformal Coating
$14.00 – $75.00SKU: CT-DCA
Chemtools® Clearcote DCA is an ultra-clear Modified Silicone conformal coating that will protect from corrosive environment, high humidity, and airborne contamination such as dirt and dust moisture and fungal growth. It is ideal for protecting electronic circuits from moisture in high temperature environments or applications requiring extreme flexibility.
-
Common Flux Thinner
$41.00SKU: AI-TH-5L
Common Flux Thinner is a solvent that is used to thin Water Soluble, No Clean and RMA fluxes in foaming and some spray applications.
Common Flux Thinner has an unopened shelf life of 2 years when stored at room temperature.
– Do not store Common Flux Thinner in direct sunlight.
– Do not freeze this product.
– Re-seal any opened containers while not in use.
– Common Flux Thinner is shipped ready to use, no mixing necessary -
Vio-Flux High Activity Liquid Flux
$12.70SKU: CT-VF-250ML
-
Anti-Static Mat & Tabletop Cleaner 5L
$72.70SKU: CT-MTT-5L
Anti-Static Mat & Table Top Cleaner is one of the fastest drying antistatic cleaners. With regular use, this cleaner will eliminate static charges from sensitive surfaces and provide long term static protection.
-
Silicone Dielectric Grease
$13.90 – $231.60SKU: CT-R14
DEOX R14 Silicone Dielectric Grease offers excellent dielectric properties with extreme high and low temperature capabilities, water resiliency, and oxidation resistance. It reduces friction, increasing the life of vacuum seals, o-rings, belts, and non metal-to-metal moving components with regular use.
R14 can be used as a long-term lubricant for plastics and rubbers, whilst shielding from moisture and contaminants. It provides a rust-proof seal against environmental exposure and corrosion, insulating spark plugs and electrical wiring.
DID YOU KNOW… DEOX R14 reduces labour and maintenance costs on machinery such as farming and mining equipment. Its high drop point keeps it tacky for longer, extending times between scheduled servicing. -
Carbon Conductive Grease
$13.30 – $36.60SKU: CT-R006
Carbon Conductive Grease is an excellent low cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. It is designed to prevent closed switches from corrosion, prevent the formation of oxides, sulphides, and other corrosion deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots.
R006 relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear.
Carbon Conductive Grease is non-hardening and non-melting with a high resistance to water washout, and offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers.
Specifications (refer to TDS for full details)
- Colour: Black
- Odour: Odourless
- Worked Penetration, 60 Strokes, ½ Scale (ASTM D1403): 269
- Volume Resistivity (ρv) (Mil-Std-883J Method 5.11.6): 114 Ω.cm
- Volume Conductivity (σv) (Mil-Std-883J Method 5.11.6): 0.009 S/cm
- Dropping Point (ASTM D2265): > 304°C
- Service Temperature: -50°C to +200°C
-
Circuit Board Lacquer – Aerosol & Bulk
$17.10 – $133.70SKU: CT-LQR
Circuit Board Lacquer is an economical general purpose resin conformal coating that provides insulation and protection against environmental stresses and factors. It offers excellent protection in high temperature environments, as well as during exposure to high humidity, shock, and vibration.
Drying quickly, Circuit Board Lacquer leaves a clear and flexible – but tough – high gloss finish which is resistant to moisture, fungal growth, abrasion, and staining. It has high dielectric strength and promotes extended service life and enhanced reliability for printed circuit board components and assemblies.
-
Conformal Coating Thinners
$68.50SKU: CT-ACCT
Conformal Coating thinners can be used with Chemtools CT-LQR, CT-ACC and and other Conformal Coating required to be thinned
-
CT-TC Tip Tinner
$13.20SKU: CT-TC-2
Tip Tinners are commonly used for solder tip tinning and cleaning in most electronic manufacturing and repair facilities. Chemtools Tip Tinner is a high strength, highly active tip tinner, designed for use where soldering tip plating has oxidised and the whole tip has turned black, resulting in an unusable tip.
Tip Tinner is conveniently packaged in a round metal container and comes with a double-sided foam adhesive pad on the underside.
-
DCT-MDG – Manual Dispensing / Syringe Gun
$76.00SKU: DCT-MDG
This ergonomic, lightweight syringe dispenser with a spring reverse function to prevent dripping is perfect for potting, lines, or dots, and is specially designed for easy, accurate, metered shots of medium to thick viscosity materials. It uses Chemtools premium disposable barrels and pistons, and is compatible with most industrial syringes.
This is a low cost unit designed to replace traditional manual methods of dispensing, such as squeeze bottles and manual syringes.
-
Sale!
Digital Bench Top Dispenser
$499.00SKU: DCT-DISP5300
These light weight, compact benchtop dispensers are suitable for many adhesive and solder paste applications. Both units are simple to operate with two timer modes – manual and pre-set – which allow repeat deposits to be made, ranging from small dots to larger blobs, whilst the ‘steady mode’ results in continuous beads. Both feature vacuum suck-back to prevent dripping, and each is supplied with a complete syringe barrel assortment, needle tip kit assortment, adapter assembly, foot switch, power cord, and user guide.
-
Upright PCB Cleaner Brush
$11.00SKU: 2027
The 2027 Hog Bristle Brush with static-neutral plywood handle can be used on small to large areas, and is specially useful on circuit boards for scrubbing and dusting.
Handle Length: 4 5/16″ , Width: 1 1/16″ (at head)
Bristle Trim Length: 1/2″, Dimensions: 7/8″ (L) x 3/8″ (W)
Upright Pcb Cleaner
-
Wood Scratch Brushes
$11.00SKU: 2021
The 2021 is a small, inexpensive, 3 Row Hog Bristle Brush with a static-neutral plywood handle for use as a ‘scratch’ brush, or for board rework and clean-up.
Handle Length: 7 3/4″, Width: 7/16″
Bristle Trim Length: 7/16″, Dimensions: 13/8″ (L) x 1/4″ (W)
Wood Scratch Brushes
-
General Utility Brush
$27.90SKU: 2022
The 2022 is an inexpensive, 4 Row Horse Hair Brush with static-neutral plywood handle for board rework and clean up, as well as being a general utility brush.
Handle Length: 8 3/8″, Width: 11/16″
Bristle Trim Length: 3/4″, Dimensions 2 1/8″ (L) x 7/8″ (W)
General Utility Brush
-
Double Ended Stainless Steel Brush Medium
$18.40SKU: 2032
The 2032 Double-Ended Hog Hair Brush with Zinc Plated Steel Handle can be used for heavy duty scrubbing at either end, with the shorter, chiseled end tapering to a point for reaching tight corners.
Handle Length: 4 1/2″, Diameter: 3/8″
Bristle Trim Length: 3/16″, Tapered 1/4″ Flat, Tuft: Oval
Double Ended Stainless Steel Brush Medium
-
Double Ended Stainless Steel Brush Small
$20.00SKU: 2031
The 2031 Double-Ended Horse Hair brush with Stainless Steel Handle can be used for heavy duty scrubbing, and when turned around, the chiseled end is great for scrubbing tight corners.
Handle Length: 4 1/2″, Diameter: 3 1/6″
Bristle Trim Length: 1/4″, Tapered 1/2″ Flat, Tuft: Oval
Double Ended Stainless Steel Brush Small
-
Latex Solder Mask
$18.90SKU: 775-8
Rover Mask 775-8 is a thick, premium quality natural latex-based temporary solder resist. It is dispensed from an easy to handle squeezable bottle with a tapered tip, and has the appearance of a white, non-running gel (Visc: 18,000 – 22,000 cps).