• Flux Remover – Circuit Board Cleaner 300g Aerosol

    SKU: CT-CBC-300

    In Stock

    0 out of 5

    Circuit Board Cleaner is an electrical parts cleaner and efficient benchtop flux remover, which also rinses dirt, moisture, dust, and corrosion, and rapidly cleans waxes, oils, and greases. It is fast drying and compatible with most rubbers and plastics.


    Circuit Board Cleaner is safe for use on PCBs, tape heads, optical and precision instruments, motors, dies, bearings, air tools, and much more.

  • Thermaltronics TMT-2000S-P Soldering System w/SHP-P 100-240VAC

    Thermaltronics TMT-2000S-P Soldering System w/SHP-P 100-240VAC

    SKU: TMT-2000S-P-UPG

    In Stock

    0 out of 5

    The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.

    Curie Heat Technology operating at 470KHz.
    Extremely compact, weighs just 1.3KG.
    No calibration or operator training required.
    No additional coil assembly costs.

    Tips not included, tip to suit this system can be found here

    P Series Cartridge Tips

  • Acceptability Of Electronic Assemblies

    SKU: IPC-A-610

    In Stock

    0 out of 5

    The IPC-A-610 is the most widely used specification published by the IPC for the electronics manufacturing industry.
    This course is designed to help electronic manufacturers achieve the highest quality, highest productivity, and most cost-effective production by ensuring their workers can correctly apply the acceptability criteria of IPC-A-610.
    The education and training goal of this program is to improve individual discrimination skills, i.e., to improve accuracy of discrimination between an ‘acceptable’ or ‘non-conforming’ electronic assembly per the IPC-A-610 series.
    This program will also teach individuals the reasons for the accept/reject criteria to enhance their motivation and ability to consistently and correctly apply the discrimination criteria.
    Throughout this three-day course, employees will be trained to correctly apply the accept/non-conforming criteria for the applicable class of production: Consumer Products (Class 1), General Industrial (Class 2), and High Reliability (Class 3).

    *Visit for course dates and locations*
    *See full description and course content below*