Categories

Tin Lead Solder Wire

1 2
  • Sn/Pb37 Solder Wire No Clean 1.25mm 2% 500g

    SKU: 63-GLOW1.25-2.5%-500g

    In Stock

    $35.50
    0 out of 5

    AIM Leaded 63/37 is a Glow Core No Clean cored wire solder which is IPC compliant and designed to provide excellent wetting characteristics, fast cycle time, and powerful capillary action. It promotes thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections.

     

    Low-to-medium post-process residues are electrically safe and do not require cleaning, but can be cleaned with a saponifier.

  • Sn63/Pb37 Solder Wire No Clean 0.5mm 2% 500g

    SKU: 63-GLOW0.40-2.5%-250G

    In Stock

    $51.40
    0 out of 5

    AIM Leaded 63/37 is a Glow Core No Clean cored wire solder which is IPC compliant and designed to provide excellent wetting characteristics, fast cycle time, and powerful capillary action. It promotes thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections.

     

    Low-to-medium post-process residues are electrically safe and do not require cleaning, but can be cleaned with a saponifier.

  • Sn63/Pb37 Solder Wire No Clean 1.00mm 2% 500g

    SKU: 63-GLOW1.00-2.5%-500G

    In Stock

    $36.70
    0 out of 5

    AIM Leaded 63/37 is a Glow Core No Clean cored wire solder which is IPC compliant and designed to provide excellent wetting characteristics, fast cycle time, and powerful capillary action. It promotes thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections.

     

    Low-to-medium post-process residues are electrically safe and do not require cleaning, but can be cleaned with a saponifier.

  • Placeholder

    Sn63/Pb37 Solder Wire RMA 0.80 2% 500g

    SKU: 63-RMA0.80-2%-500g

    In Stock

    $45.50
    0 out of 5

    AIM Leaded 63/37 Solder Wire is a mildly rosin activated, general-purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints.

     

    Post-process residues are slight to moderate, and may be left on non-critical applications, but should be removed from any critical applications. RMA cored wire meets Mil-Spec cleanliness requirements without cleaning.

  • Placeholder

    Sn63/Pb37 Solder Wire RMA 1.00mm 2% 500g

    SKU: 63-RMA1.00-2%-500g

    In Stock

    $44.00
    0 out of 5

    AIM Leaded 63/37 Solder Wire is a mildly rosin activated, general-purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints.

     

    Post-process residues are slight to moderate, and may be left on non-critical applications, but should be removed from any critical applications. RMA cored wire meets Mil-Spec cleanliness requirements without cleaning.

  • Placeholder

    Sn63/Pb37 Solder Wire RMA 1.25mm 2% 500g

    SKU: 63-RMA1.25-2%-500G

    In Stock

    $42.60
    0 out of 5

    AIM Leaded 63/37 Solder Wire is a mildly rosin activated, general-purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints.

     

    Post-process residues are slight to moderate, and may be left on non-critical applications, but should be removed from any critical applications. RMA cored wire meets Mil-Spec cleanliness requirements without cleaning.

  • Placeholder

    Sn63/Pb37 Solder Wire RMA0.63mm 2% 500g

    SKU: 63-RMA0.63-2%-500G

    In Stock

    $47.00
    0 out of 5

    AIM Leaded 63/37 Solder Wire is a mildly rosin activated, general-purpose wire solder for use in applications requiring good activation. RMA cored wire is active enough for excellent tarnish or oxide removal, and will produce bright shiny solder joints.

     

    Post-process residues are slight to moderate, and may be left on non-critical applications, but should be removed from any critical applications. RMA cored wire meets Mil-Spec cleanliness requirements without cleaning.

  • Sn63/Pb37 Solder Wire Water Soluble 0.40mm 2% 250g

    SKU: 63-OAJ0.40-2%-250G

    In Stock

    $38.90
    0 out of 5

    AIM Leaded 63/37 Solder Wire is an OAJ cored wire featuring a halide-activated system that has been neutralised with an amine. It provides a high activation with excellent tarnish or oxide removal, and maximum capillary action leading to faster wetting and reduced thermal degradation of the board materials.

     

    Post-process residues are readily soluble in hot water.

     

    IPC flux classification for this material is ORH1.

  • Sn63/Pb37 Solder Wire Water Soluble 0.80mm 2% 500g

    SKU: 63-OAJ0.80-2%-500G

    In Stock

    $45.60
    0 out of 5

    AIM Leaded 63/37 Solder Wire is an OAJ cored wire featuring a halide-activated system that has been neutralised with an amine. It provides a high activation with excellent tarnish or oxide removal, and maximum capillary action leading to faster wetting and reduced thermal degradation of the board materials.

     

    Post-process residues are readily soluble in hot water.

     

    IPC flux classification for this material is ORH1.

  • Sn63/Pb37 Solder Wire Water Soluble 1.00mm 2% 500g

    SKU: 63-OAJ1.00-2%-500G

    In Stock

    $44.00
    0 out of 5

    AIM Leaded 63/37 Solder Wire is an OAJ cored wire featuring a halide-activated system that has been neutralised with an amine. It provides a high activation with excellent tarnish or oxide removal, and maximum capillary action leading to faster wetting and reduced thermal degradation of the board materials.

     

    Post-process residues are readily soluble in hot water.

     

    IPC flux classification for this material is ORH1.

  • Sn63/Pb37 Solder Wire Water Soluble 1.25mm 2% 500g

    SKU: 63-OAJ1.25-2%-500G

    In Stock

    $42.60
    0 out of 5

    AIM Leaded 63/37 Solder Wire is an OAJ cored wire featuring a halide-activated system that has been neutralised with an amine. It provides a high activation with excellent tarnish or oxide removal, and maximum capillary action leading to faster wetting and reduced thermal degradation of the board materials.

     

    Post-process residues are readily soluble in hot water.

     

    IPC flux classification for this material is ORH1.

  • AIM Leaded Solder wire Sn63/Pb37 CX18 No Clean 0.65mm 500g

    SKU: 63-CX18-0.65-2.5%-500G

    In Stock

    $39.20
    0 out of 5

    AIM CX18 63/37 Leaded Solder Wire is a no clean flux core wire solder designed to offer excellent soldering results on all surface finishes. Engineered for high operator satisfaction CX18 is a low odor/smoke formula which promotes thermal transfer, and fast wetting without the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.

  • AIM Leaded Solder wire Sn63/Pb37 CX18 No Clean 0.80mm 500g

    SKU: 63-CX18-0.80-2.5%-500G

    In Stock

    $37.90
    0 out of 5

    AIM CX18 63/37 Leaded Solder Wire is a no clean flux core wire solder designed to offer excellent soldering results on all surface finishes. Engineered for high operator satisfaction CX18 is a low odor/smoke formula which promotes thermal transfer, and fast wetting without the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.

  • AIM Leaded Solder wire Sn63/Pb37 CX18 No Clean 1.00mm 500g

    SKU: 63-CX18-1.00-2.5%-500G

    In Stock

    $36.70
    0 out of 5

    AIM CX18 63/37 Leaded Solder Wire is a no clean flux core wire solder designed to offer excellent soldering results on all surface finishes. Engineered for high operator satisfaction CX18 is a low odor/smoke formula which promotes thermal transfer, and fast wetting without the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.

  • AIM Leaded Solder wire Sn63/Pb37 CX18 No Clean 1.20mm 500g

    SKU: 63-CX18-1.20-2.5%-500G

    In Stock

    $35.50
    0 out of 5

    AIM CX18 63/37 Leaded Solder Wire is a no clean flux core wire solder designed to offer excellent soldering results on all surface finishes. Engineered for high operator satisfaction CX18 is a low odor/smoke formula which promotes thermal transfer, and fast wetting without the need for additional flux. CX18 post solder residues are minimal, clear and pass IPC-004A and IPC-004B SIR and corrosion requirements.

  • AIM Leaded Solder wire Sn63/Pb37 No Clean 0.40mm 250g

    SKU: 63-GLOW0.40-2%-250G

    In Stock

    $32.40
    0 out of 5

    AIM Leaded 63/37 is a Glow Core No Clean cored wire solder which is IPC compliant and designed to provide excellent wetting characteristics, fast cycle time, and powerful capillary action. It promotes thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections.

     

    Low to medium post-process residues are electrically safe and do not require cleaning, but can be cleaned with a saponifier.

     

    AIM Leaded Solder wire Sn63/Pb37 No Clean 0.40mm 250g

  • AIM Leaded Solder wire Sn63/Pb37 No Clean 0.50mm 500g

    SKU: 63-GLOW0.50-1%-500G

    In Stock

    $51.40
    0 out of 5

    AIM Leaded 63/37 is a Glow Core No Clean cored wire solder which is IPC compliant and designed to provide excellent wetting characteristics, fast cycle time, and powerful capillary action. It promotes thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections.

    Low to medium post-process residues are electrically safe and do not require cleaning, but can be cleaned with a saponifier.

     

    AIM Leaded Solder wire Sn63/Pb37 No Clean 0.50mm 500g

  • AIM Leaded Solder wire Sn63/Pb37 No Clean 0.63mm 500g

    SKU: 63-GLOW0.63-1%-500G

    In Stock

    $39.20
    0 out of 5

    AIM Leaded 63/37 is a Glow Core No clean cored wire solder which is IPC compliant and designed to provide excellent wetting characteristics, fast cycle time, and powerful capillary action. It promotes thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections.

     

    Low-to-medium post-process residues are electrically safe and do not require cleaning, but can be cleaned with a saponifier.

     

    AIM Leaded Solder wire Sn63/Pb37 No Clean 0.63mm 500g

  • AIM Leaded Solder wire Sn63/Pb37 No Clean 0.63mm 500g

    SKU: 63-GLOW0.63-2%-500G

    In Stock

    $39.20
    0 out of 5

    AIM Leaded 63/37 is a Glow Core No Clean cored wire solder which is IPC compliant and designed to provide excellent wetting characteristics, fast cycle time, and powerful capillary action. It promotes thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections.

     

    Low-to-medium post-process residues are electrically safe and do not require cleaning, but can be cleaned with a saponifier.

     

    AIM Leaded Solder wire Sn63/Pb37 No Clean 0.63mm 500g

  • AIM Leaded Solder wire Sn63/Pb37 No Clean 0.80mm 500g

    SKU: 63-GLOW0.80-1%-500G

    In Stock

    $37.90
    0 out of 5

    AIM Leaded 63/37 is a Glow Core No Clean cored wire solder which is IPC compliant and designed to provide excellent wetting characteristics, fast cycle time, and powerful capillary action. It promotes thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections.

    Low-to-medium post-process residues are electrically safe and do not require cleaning, but can be cleaned with a saponifier.

    AIM Leaded Solder wire Sn63/Pb37 No Clean 0.80mm 500g

1 2