Categories
- Solders & Fluxes
- Soldering & Rework Equipment
- Production & Rework Consumables
- Maintenance Chemicals
- Conformal Coatings & Lacquers
- Potting & Thermal Compounds
- Dispensing Equipment & Consumables
- Static Control Products
- Adhesives & Tapes
- IPC Soldering Training
- Fume & Chemical Extraction
- Mobile Phone Repair Essentials
- PCB Inspection
Products
-
General Utility Brush
$27.90SKU: 2022
Add to cartThe 2022 is an inexpensive, 4 Row Horse Hair Brush with static-neutral plywood handle for board rework and clean up, as well as being a general utility brush.
Handle Length: 8 3/8″, Width: 11/16″
Bristle Trim Length: 3/4″, Dimensions 2 1/8″ (L) x 7/8″ (W)
General Utility Brush
-
Double Ended Stainless Steel Brush Medium
$18.40SKU: 2032
Add to cartThe 2032 Double-Ended Hog Hair Brush with Zinc Plated Steel Handle can be used for heavy duty scrubbing at either end, with the shorter, chiseled end tapering to a point for reaching tight corners.
Handle Length: 4 1/2″, Diameter: 3/8″
Bristle Trim Length: 3/16″, Tapered 1/4″ Flat, Tuft: Oval
Double Ended Stainless Steel Brush Medium
-
Double Ended Stainless Steel Brush Small
$20.00SKU: 2031
Add to cartThe 2031 Double-Ended Horse Hair brush with Stainless Steel Handle can be used for heavy duty scrubbing, and when turned around, the chiseled end is great for scrubbing tight corners.
Handle Length: 4 1/2″, Diameter: 3 1/6″
Bristle Trim Length: 1/4″, Tapered 1/2″ Flat, Tuft: Oval
Double Ended Stainless Steel Brush Small
-
Latex Solder Mask
$18.90SKU: 775-8
Add to cartRover Mask 775-8 is a thick, premium quality natural latex-based temporary solder resist. It is dispensed from an easy to handle squeezable bottle with a tapered tip, and has the appearance of a white, non-running gel (Visc: 18,000 – 22,000 cps).
-
Dross Reducing Powder
$52.70 – $146.30SKU: CT-DRP
Select optionsDross Reducing Powder is a white, inorganic powder which removes oxides from the solder surface, cleaning it to allow regeneration of usable metal and decreasing the amount of dross for disposal. It extends the use of solder by encapsulating metal oxides, and is recommended for tin/lead solder pot temperatures of 235°C through to 260°C.
Dross Reducing Power reduces dross in solder pots and can be used in wave soldering and still solder baths. It contains no fatty acids or mineral oils and no chlorides, ensuring no interference with board or component cleanliness. -
Fibreglass Eraser Pen
$15.70SKU: OK-AP1
Add to cartThis versatile Glass Fibre Pencil is an eraser pen is made from fine fibreglass threads. It is perfect for cleaning, polishing, and burnishing applications on electrical and electronic equipment.
Common uses include rust removal, contact cleaning, cleaning of pads, de-burring metal parts, and many more.
-
Flux Gel RMA 10cc
$31.60SKU: RMA212
Select optionsFlux Gel RMA
Available with plunger for hand applications or without plunger to be used in a pneumatic dispensing system. -
Flux Gel Water Soluble
$40.00SKU: WS353S
Select optionsFlux Gel Water Soluble
Available with plunger for hand applications or without plunger to be used in a pneumatic dispensing system.
-
Flux Gel / Paste No Clean 100g Jar
$117.10SKU: NC254J100
Add to cartNC254 No Clean Flux Gel/ Paste is a no clean tacky/rework flux designed to wet virtually all solderable electronic surfaces, components, assemblies, and substrates. It may be used for general touch-up or rework of printed circuit boards, and for attaching spheres to ball grid array (BGA) packages. Its superior wetting ability results in bright, smooth, skiny solder joints, whether reflowed by hand, hot-air rework station, convection reflow oven, or vapor phase soldering systems. Residues that remain on surfaces after soldering are clear, leaving a cosmetically appealing repair that can be easily pin-probed during in-circuit testing. NC254 is compatible with all tin-lead and lead-free alloys and may be brushed on, dispensed, pin transferred, or stencil printed.
Flux Gel / Paste No Clean 100g Jar
-
Heat Sink Compound Silicone Free
$9.40 – $22.80SKU: CT-R00
Select optionsChemtools® R00 Silicone Free Heat Sink Compound is a white thermally conductive grease which is specially formulated for use in a silicone free environment, where silicone contamination may hurt solderability and increase solder defects. This non-crosslinked thermal compound does not dry out and is commonly used to improve heat flow between heat sinks and heat generating electronic devices such as LED’s, CPU’s and motors.
Heatsink Compound is designed to dissipate and efficiently transfer heat away from the heat generating component. It is a specifically formulated low bleed and low evaporation formula for use on applications where thermal transfer is required without electrical conductivity.
As a re-workable, removable, and non-toxic interface between heatsinks and heat sources, Heatsink Compound can be easily applied to quickly eliminate air gaps and safely maximise and aid the transfer of heat. -
Heatsink Compound
$5.50 – $35.80SKU: CT-R001-SI
Select optionsHeatsink Compound is designed to dissipate and efficiently transfer heat away from the heat generating component. It is a specifically formulated low bleed and low evaporation formula for use on applications where thermal transfer is required without electrical conductivity.
As a re-workable, removable, and non-toxic interface between heatsinks and heat sources, Heatsink Compound can be easily applied to quickly eliminate air gaps and safely maximise and aid the transfer of heat.
Heatsink Compound 150g Tube
-
-
Long Nose Plier Serrated Jaw
$41.80SKU: 485S
Add to cartModel 485 is referred to by Xuron as the ‘true electronics production long nose pliers’. Many engineers and production managers agree that traditional drop-forged designs are too bulky and lack the sensitive ‘feel’ required for precision electronics assembly operations.
These thin profile Long Nose Pliers allow access into high density areas, while its radiused outside edges do not damage or scar wire.
Available in non-serrated and serrated varieties.
Long Nose Plier Serrated Jaw
-
Manual Syringe Assembly – Graduated – 50 pack
$16.30 – $34.80SKU: DCT-MSG8
Select optionsManual Syringe Assembly – Graduated 3CC – 50 pack
-
Manual Syringe Assembly – Non Graduated – 50 pack
$21.10 – $52.70SKU: DCT-MS8
Select optionsChemtools Industrial grade manual syringe assemblies are designed for use with adhesives, chemicals, solvents, gels, and pastes. They come fully assembled in clear plastic barrels and include a plunger rod and rubber piston. The luer lock design makes it safe for use with all Chemtools dispensing tips.
-
Metcal BVX-201 Main Filter HEPA Carbon
$168.50SKU: FM-BVX200
Add to cartActivated carbon filter for the Metcal BVX-201 Fume Extractor to remove additional gases.
-
Xuron Micro Pneumatic Flush Cutter
$409.00SKU: 590
Add to cartDesigned specifically for manufacturing environments where ergonomics and productivity are of prime importance, the Model 590 Micro-Pneumatic Flush Cutter is sized to fit comfortably in the operators hand, whilst being light weight, ultra quiet, and fast acting. It requires only 50 psi air pressure, and flush cuts soft wire up to 16 AWG (1.27mm)
The unit includes a 6 Foot (1.83 Meter) air supply line with a 1/8″ NPT termination.
Micro Pneumatic Flush Cutter
-
Micro Pneumatic Flush Cutter Blade
$70.30SKU: P40230
Add to cartDesigned specifically for manufacturing environments where ergonomics and productivity are of prime importance, the Model 590 Micro-Pneumatic Flush Cutter is sized to fit comfortably in the operators hand, whilst being light weight, ultra quiet, and fast acting. It requires only 50 psi air pressure, and flush cuts soft wire up to 16 AWG (1.27mm)
The unit includes a 6 Foot (1.83 Meter) air supply line with a 1/8″ NPT termination.
Micro Pneumatic Flush Cutter Blade
-
Okay AA-SA General Purpose Fine Point Tweezer
$15.70SKU: 27-0701
Add to cartGeneral purpose stainless steel tweezer with straight point and hardened tips. Ideal for general electronics use.
-
Okay 2A-SA Blunt End Tweezer
$15.70SKU: 27-0705
Add to cartBlunt, flattened point, stainless steel tweezer for SMT use. Strong blades with blunt/flat ends.