Categories
- Solders & Fluxes
- Soldering & Rework Equipment
- Production & Rework Consumables
- Maintenance Chemicals
- Conformal Coatings & Lacquers
- Potting & Thermal Compounds
- Dispensing Equipment & Consumables
- Static Control Products
- Adhesives & Tapes
- IPC Soldering Training
- Fume & Chemical Extraction
- Mobile Phone Repair Essentials
- PCB Inspection
Solders & Fluxes
-
Liquid Flux RMA 202-25
$33.40 – $79.00SKU: 202-25
Solids Content – 25%
RMA 202-25 Liquid Flux is an IPA-based, medium solids, mildly rosin activated flux which leaves a post-process residue that is insulating, non-hydroscopic, non-corrosive, and non-conductive. -
RMA 202-25 RMA Liquid Flux
$7.40 – $8.30SKU: CT-RMA
RMA 202-25 RMA Liquid Flux 15 mL brush
-
Liquid Flux WS715M Water Soluble
$42.20 – $101.10SKU: WS715M
WS715M is an alcohol based, organically activated, rosin-free, water soluble liquid flux designed for wave, selective and rework solder applications.
-
Vio-Flux High Activity Liquid Flux
$12.70SKU: CT-VF-250ML
-
Flux Gel RMA 10cc
$31.60SKU: RMA212
Flux Gel RMA
Available with plunger for hand applications or without plunger to be used in a pneumatic dispensing system. -
Flux Gel Water Soluble
$40.00SKU: WS353S
Flux Gel Water Soluble
Available with plunger for hand applications or without plunger to be used in a pneumatic dispensing system.
-
Flux Gel / Paste No Clean 100g Jar
$117.10SKU: NC254J100
NC254 No Clean Flux Gel/ Paste is a no clean tacky/rework flux designed to wet virtually all solderable electronic surfaces, components, assemblies, and substrates. It may be used for general touch-up or rework of printed circuit boards, and for attaching spheres to ball grid array (BGA) packages. Its superior wetting ability results in bright, smooth, skiny solder joints, whether reflowed by hand, hot-air rework station, convection reflow oven, or vapor phase soldering systems. Residues that remain on surfaces after soldering are clear, leaving a cosmetically appealing repair that can be easily pin-probed during in-circuit testing. NC254 is compatible with all tin-lead and lead-free alloys and may be brushed on, dispensed, pin transferred, or stencil printed.
Flux Gel / Paste No Clean 100g Jar
-
Solder Wick / Solder Braid No Clean
$4.30 – $27.10SKU: WKNC
Solder Wick also known as Solder braid or Solder wick is used most often in the rework and repair of circuit boards and other applications in computers, cell phones or other electronics. It is woven copper that easily let you remove the extra solder from components or pads on the circuit board.
Chemtools wick products made using ultra, oxide-free copper, braided into a weave configuration which maximizes thermal conduction and solder retention. Immediately after braiding, the wick is cleaned in an environmentally friendly process.
Every precaution is taken to ensure that the braid remains oxide-free until it is coated through a proprietary fluxing process using pure type ‘R’ resin flux conforming to all the requirements of Mil-f14256F, Type ‘R’ and ANSI/J-STD-004.All Chemtools desoldering wick are all RoHS compliant and can be used with lead and lead free rework.
-
Surface Mount Epoxy
$25.30 – $157.90SKU: 4044
Epoxy 4044 is single part epoxy adhesive used for bonding SMT components to a PWB prior to double sided reflow or wave solder assembly. It is formulated to resist shear-thinning and has rapid thermal cure properties. Its viscosity and surface tension provide the tack force needed for use with high speed placement equipment.
Epoxy 4044 offers excellent adhesion to metal, cermaics, and glass-filled epoxy surfaces, and is suitable for all open squeegee and enclosed head stencil printing systems.
Visc: 600 – 1,000 Thix
Boiling Point: >260 degrees celsius
Tensile Strength: 11,500 psi
Specific Gravity: 113
Surface Mount Epoxy Red 10cc tube
Replacement for SMA10SL