Categories
- Solders & Fluxes
- Soldering & Rework Equipment
- Production & Rework Consumables
- Maintenance Chemicals
- Conformal Coatings & Lacquers
- Potting & Thermal Compounds
- Dispensing Equipment & Consumables
- Static Control Products
- Adhesives & Tapes
- IPC Soldering Training
- Fume & Chemical Extraction
- Mobile Phone Repair Essentials
- PCB Inspection
Products
-
Piston 3cc Wiper White – Pk50 or Pk1000
$11.00 – $169.10SKU: DCT-5203
Select optionsPiston 3cc Wiper White – Available in pack of 50 or pack or 1000
-
Piston 5cc Wiper White – Pk50 or Pk 1000
$13.40 – $179.50SKU: DCT-5205
Select optionsPiston 5cc Wiper White – Available in pack of 50 or pack or 1000
-
Piston 10cc Wiper White – Pk50 or Pk1000
$15.70 – $191.10SKU: DCT-5210
Select optionsPiston 10cc Wiper White – Available in pack of 50 or pack or 1000
-
Piston 30/55cc Wiper White – Pk50 or Pk1000
$18.00 – $202.70SKU: DCT-5230
Select optionsPiston 30/55cc Wiper White – Available in pack of 50 or pack or 1000
-
10mm Male Stud Assembly Screw Type
$2.70SKU: PS-1-SC
Add to cartThe screw-on Male stud Assembly has been designed to facilitate the process of attaching studs to dissapative and conductive bench and floor mats.
10mm male studd assembly screw type for esd matting
-
Earth Bonding Point Bar
$17.60SKU: 23-0726
Add to cartThe earth Bonding Bar enables two users to plug their wrist straps into the front of the bench rather than at the back into the anti-static matting. Its ring terminal then connects to an earth, or 3 pin ESD plug.
Earth Bonding Point Bar
-
Floor Mat Cord Female
$11.60SKU: FGC151F
Add to cartThe Floor Mat Cord with built in 1 Meg resistor has been designed for grounding floor mats, runners, and shelf liners. The bevel cap prevents the snap from being accidentally removed from the mat by rolling chairs, carts, or walking traffic. A 10mm male stud securely snaps to the mat with 5mm ring terminal on the opposite end. The Floor Mat Cord can also be used on benchmats in conjunction with an Earth Bonding Bar.
Floor Mat Cord Female
-
Benchmat Cord Dual Outlet Female
$11.60SKU: CGC151F
Add to cartThe Common Ground Cord with 10mm female ring terminal provides a common grounding point for one or two wrist straps via its special banana socket.
This ground to bench mat lead has been designed for use at workstations using its 10mm stud connection for mats or runners.
Benchmat Cord Dual Outlet Female
-
8414 Cyanoacrylate Instant Adhesive 25ml
$12.00SKU: 8414-20
Add to cartRapidstick™ 8414 Cyanoacrylate Adhesive offers an enhanced performance bond on a wide range of vinyl and other plastics. It is specially formulated for adhering vinyls and plastics to themselves, or to metal.
8414 is typically used for optical goods and medical devices, as well as toys, telephones, and cameras. Recommended bonding surfaces include acrylic, PVC, polycarbonate, PEEK, PET, PETG, polysulfone, latex, polyimide, ABS, rubber, and metals.
Specifications (refer to TDS for full details)
- Appearance: Clear Liquid
- Composition: Ethyl Cyanoacrylate
- Viscocity: Medium
- Cure Speed: Medium
- Strength: High
- Gap Filling: Up to 0.20 mm
- Temperature Range (°C): -60 to +80
An alternative to Loctite 414
-
8480 Instant Adhesive 25ml Black Rubber Toughened
$16.00SKU: 8480-20
Add to cartRapidstick™ 8480 Cyanoacrylate Adhesive has excellent resistance to peel and shock loads. It is specially formulated for adhering various rubbers, metals, magnets, and plastics for use in difficult environments.
8480 is ideal for bonding speaker assemblies, electronic and electrical components, computer assemblies, disk drives, and automotive parts.
An alternative to Loctite 480
Specifications (refer to TDS for full details)
- Appearance: Black Liquid
- Composition: Ethyl Cyanoacrylate
- Viscocity: Medium
- Cure Speed: Fast
- Strength: High
- Gap Filling: Up to 0.30 mm
- Temperature Range (°C): -60 to +80
-
Certified IPC Trainer (CIT) Train the Trainer Courses
$0.00SKU: Certified IPC Trainer
Add to cartCertified IPC Trainer (CIT) – Train The Trainer
CIT Certification is recommended for individuals in companies, independent consultants and faculty members of education and training institutions. Upon successful completion of these “train-the-trainer” programs, candidates are eligible to deliver and certify CIS (Operator) training. ACIT level certification is conducted by an official licenced IPC Training company. Visit AIM Training for further information and to discuss your requirements directly with their team.
-
Acceptability Of Electronic Assemblies Hard Copy Book Rev H
$504.30SKU: IPC-A-610-H-MANUAL-REV-H
Add to cartAcceptability Of Electronic Assemblies Hard Copy Book
-
Rework, Repair & Modification Hard Copy Book
$665.80SKU: IPC-7711-C-MANUAL-REV-C
Add to cartRework, Repair & Modification Hard Copy Book
-
Requirements and Acceptance for Cable and Wire Harness Assemblies Hard Copy Book Rev E
$504.30SKU: IPC-620-E-MANUAL-REV-E
Add to cartIPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies.
IPC/WHMA-A-620E was developed by IPC and the Wire Harness Manufacturers Association (WHMA) (an affiliate of IPC).
-
Requirements for Soldered Electrical and Electronic Assemblies Hard Copy Book
$415.80SKU: IPC-J-STD001-H-MANUAL-REV-H
Add to cartRequirements for Soldered Electrical and Electronic Assemblies Hard Copy Book
-
AeroGun Aerosol Spray Gun Attachment
$13.70SKU: CT-AG-1
Add to cartAeroGun is a durable and heavy duty ergonomic trigger spray attachment for all standard aerosols. It is a vital dispensing accessory designed to reduce or eliminate injury incurred due to repetitive, continuous, or otherwise excessive use of aerosol spraying. Its full-grip handle turns regular aerosols into professional spray guns, allowing the user better manoeuverability while dispensing paints, lubricants, solvents, or other chemicals.
-
Acrylic Conformal Coating – Aerosol & Bulk
$14.00 – $175.30SKU: CT-ACC
Select optionsClearcote Acrylic Conformal Coating is a premium, high performance protectant which offers high dielectric strength for insulation and protection against the
environment, dust, and chemicals. Its fast drying, durable, high gloss finish is specially formulated for protecting PCBs from abrasion and staining and providing ongoing resistance to moisture and fungal growth – particularly when used in harsh environments.Acrylic Conformal Coating contains a UV trace which glows under UV light to confirm coverage across the entire surface area.
-
DCA Silicone Conformal Coating
$16.50 – $75.00SKU: CT-DCA
Select optionsChemtools® Clearcote DCA is an ultra-clear Modified Silicone conformal coating that will protect from corrosive environment, high humidity, and airborne contamination such as dirt and dust moisture and fungal growth. It is ideal for protecting electronic circuits from moisture in high temperature environments or applications requiring extreme flexibility.
-
Adjustable Wrist Strap Set
$6.90SKU: WRS-SET
Add to cartWith a built-in 1 Meg resistor and a coiled 100 foot cord, the Adjustable Wrist Band Set also includes a 10mm press stud on both ends, along with a banana plug/crocodile clip.
Adjustable Wrist Strap Set
-
Cup Style Heel Grounder
$8.40SKU: 23-9826
Add to cartOffering instant discharge for mobile personnel, the Cup Style Heel Grounder ensures discharge upon entry to EPA equipped areas with ESD safe flooring or floor mats. It comes with a built-in 1 Meg resistor, and is comfortable and easy to fit with a velcro enclosure. The Toe grounder is suitable for all shoe sizes and shapes.
Cup Style Heel Grounder