Categories
- Solders & Fluxes
- Soldering & Rework Equipment
- Production & Rework Consumables
- Maintenance Chemicals
- Conformal Coatings & Lacquers
- Potting & Thermal Compounds
- Dispensing Equipment & Consumables
- Static Control Products
- Adhesives & Tapes
- IPC Soldering Training
- Fume & Chemical Extraction
- Mobile Phone Repair Essentials
- PCB Inspection
Thermaltronics
-
Thermaltronics Soldering Tip K80CH050 Chisel Extra Large 5.0mm (0.20″)
$20.90SKU: K80CH050
Thermaltronics K80CH050 Chisel Extra Large 5.0mm (0.20″)
-
Thermaltronics Soldering Tip K80CS005 Conical Sharp 0.5mm (0.02″)
$20.90SKU: K80CS005
Thermaltronics K80CS005 Conical Sharp 0.5mm (0.02″)
-
Thermaltronics Soldering Tip PM75C300 Conical 0.4mm (0.016″) interchangeable for Metcal SFP-CNL04
$24.40SKU: PM75C300
Thermaltronics PM75C300 Conical 0.4mm (0.016″) interchangeable for Metcal SFP-CNL04
-
Thermaltronics Soldering Tip PM75CS152 Conical Sharp 0.4mm (0.016″) interchangeable for Metcal SFP-CN05
$24.40SKU: PM75CS152
Thermaltronics PM75CS152 Conical Sharp 0.4mm (0.016″)
-
Thermaltronics Soldering Tip PM75BV350 Bevel 60deg 1.78mm (0.07″)
$24.40SKU: PM75BV350
Thermaltronics PM75BV350 Bevel 60deg 1.78mm (0.07″)
-
Thermaltronics Soldering Tip P75CH012 Chisel 30deg 1.20mm (0.047″)
$24.40SKU: P75CH012
Thermaltronics P75CH012 Chisel 30deg 1.20mm (0.047″)
-
Thermaltronics Soldering Tip P75CH016 Chisel 30deg 1.60mm (0.06″)
$24.40SKU: P75CH016
Thermaltronics P75CH016 Chisel 30deg 1.60mm (0.06″)
-
Thermaltronics Soldering Tip P75WV020 Hoof w/Dent 45deg 2.00mm (0.08″)
$41.70SKU: P75WV020
Thermaltronics P75WV020 Hoof w/Dent 45deg 2.00mm (0.08″)
-
Thermaltronics Soldering Tip P75CH024 Chisel 30deg 2.40mm (0.09″)
$24.40SKU: P75CH024
Thermaltronics P75CH024 Chisel 30deg 2.40mm (0.09″)
-
Thermaltronics Soldering Tip P75CH052 Chisel 30deg 5.20mm (0.20″)
$24.40SKU: P75CH052
Thermaltronics P75CH052 Chisel 30deg 5.20mm (0.20″)
-
Thermaltronics Soldering Tip P80CH052 Chisel 30deg 5.20mm (0.20″)
$24.40SKU: P80CH052
Thermaltronics P80CH052 Chisel 30deg 5.20mm (0.20″)
-
Thermaltronics Soldering Tip P80CH016 Chisel 30deg 1.60mm (0.06″)
$24.40SKU: P80CH016
Thermaltronics P80CH016 Chisel 30deg 1.60mm (0.06″)
-
Thermaltronics Soldering Tip P80CH024 Chisel 30deg 2.40mm (0.09″)
$24.40SKU: P80CH024
Thermaltronics P80CH024 Chisel 30deg 2.40mm (0.09″)
-
Sale!
Thermaltronics TMT-9000S-2 Soldering System interchangeable for Metcal MX Series
$595.80SKU: TMT-9000S-2
Thermaltronics Soldering equipment offers improved heating capacity and the absence of difficult to predict “over-shoot”. Dwell times on the solder joints can be dramatically reduced in order to reduce thermal shock, all while avoiding ‘sticking’ and maintaining good solder flow
The grip diameter and tip-to-grip length are comically small compared to any iron, without over-heating issues. The cartridge style tips are also slender and exclude bulbous protrusion close to the tip. Placement and monitoring of joints is made much easier, making the iron a pleasure to work with and a “must have” for anyone whom regularly picks up a soldering iron. -
Sale!
Thermaltronics TMT-2000S Soldering System Series
$266.40 – $390.00SKU: TMT-2000S Series
The TMT-2000S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
Curie Heat with RF Induction is the safer alternative to conventional thermostatically controlled heaters, inductive heating enables maximum tip temperature to be governed without temperature-sensing or control circuitry.
An inductive heater suitable for use in a soldering iron comprises a copper slug coated with magnetic material, wound about with a current-carrying coil. Magnetic coating properties dictate how its Curie temperature coincides with the pre-set maximum temperature for the soldering iron. At this Curie temperature, the coating loses its magnetic properties, causing the inductive heating action to cease. Slug temperature never can overshoot this natural maximum. When the iron contacts a joint, applying thermal load, the slug falls below the Curie temperature, the coating instantly begins to reacquire magnetic properties.
In this way, an inductive soldering-iron heater operates without a temperature sensor or control circuitry, and recommences supplying thermal energy automatically, as soon as the tip contacts the joint.. Tip temperature is capped effectively, never overshooting the pre-set maximum.It is a dual switchable soldering system which comes at a desirable price for
hobbyists, small workshops, universities, and production line soldering.
• Extremely compact – weighs in at just 1.3Kg
• Provides true process control
• Reduces potential to damage board, component and solder joint qualityWHICH TMT-2000S SYSTEM IS BEST FOR YOU?
See below for detailed description of each system, system do not come with a standard tip. You will need to order the tips you require -
Thermaltronics DS-KIT-1 Desoldering Kit for TMT-9000S interchangeable for Metcal MX-D001
$577.50SKU: DS-KIT-1
Thermaltronics DS-KIT-1 desoldering kit for use on the TMT-9000S uses shop air to create a powerful air vacuum to clean through-holes quickly and efficiently. Cleaning and maintenance is quick and easy with the use of replaceable filter wools (DS-FW-1) and chamber liners (DS-CL-1).
-
Thermaltronics DS-KIT-3 Desoldering Kit for TMT-2000S
$577.50SKU: DS-KIT-3
Thermaltronics DS-KIT-3 desoldering kit for use on the TMT-2000S uses shop air to create a powerful air vacuum to clean through-holes quickly and efficiently. Cleaning and maintenance is quick and easy with the use of replaceable filter wools (DS-FW-1) and chamber liners (DS-CL-1).
-
Thermaltronics TZ-KIT-1 Tweezers Kit for TMT-9000S
$449.20SKU: TZ-KIT-1
Thermaltronics TZ-KIT-1 Tweezers Kit for TMT-9000S
Uses Thermaltronics MTZ Series Tweezers Tips.Dual lockable arms.Adjustable alignment of tips in x-y directions. -
Thermaltronics TZ-KIT-3 Tweezers Kit for TMT-2000S
$385.00SKU: TZ-KIT-3
Thermaltronics TZ-KIT-3 Tweezers Kit for TMT-2000S
Uses Thermaltronics KTZ Series Tweezers Tips.Dual lockable arms.Adjustable alignment of tips in x-y directions. -
Thermaltronics Soldering Tip M75C300 Conical 0.4mm alternative for M7C300 / Metcal STTC-145
$26.90SKU: M75C300
Thermaltronics M75C300 Conical 0.4mm alternative for M7C300 / Metcal STTC-145 – For other Thermaltronics or Metcal tips not listed, Contact Us