P Series / Metcal SFP & SCP

Below is a selected range of common P Series tips. 
If there is a specific tip outside of this range that you require, they can be ordered in with a lead time.      Please contact us for more information. 
P Series Tips are to be used with the Thermaltronics TMT-2000S-2 with the SHP-P or SHP-PM handpieces. P series tips can also be used in some Metcal™ Soldering Systems.  If you are using SFP or SCP tips from Metcal™ for your Metcal™  MFR series equipment, Thermaltronics P Series tips are compatible with these systems. 
 Soldering Tip – Temperature Guide
Tip Cartridge Temperature Guide Colour Band
P6 / STP-XXXX 325°C – 358°C Blue
P75-PM75 / SFP-XXXX 365°C – 410°C  Yellow
P8 / SCP-XXXX 420°C – 475°C Red
Each Thermaltronics tip geometry will typically idle within a temperature range of +/-1.1°C. The length and geometry of a tip will have an influence on the tip idle temperature. 
Example: A 2.5mm Chisel tips in the P7 series may be slightly hotter than 1.78mm chisel in the same P7 series. Rule of thumb is to use the biggest tip possible for the job to ensure the best results. 
  • Thermaltronics Soldering Tip PM75C300 Conical 0.4mm (0.016″) interchangeable for Metcal SFP-CNL04

    SKU: PM75C300

    $24.40
    0 out of 5

    Thermaltronics PM75C300 Conical 0.4mm (0.016″) interchangeable for Metcal SFP-CNL04

    Add to cart
  • Thermaltronics Soldering Tip PM75CS152 Conical Sharp 0.4mm (0.016″) interchangeable for Metcal SFP-CN05

    SKU: PM75CS152

    $24.40
    0 out of 5

    Thermaltronics PM75CS152 Conical Sharp 0.4mm (0.016″)

    Add to cart
  • Thermaltronics Soldering Tip PM75BV350 Bevel 60deg 1.78mm (0.07″)

    SKU: PM75BV350

    $24.40
    0 out of 5

    Thermaltronics PM75BV350 Bevel 60deg 1.78mm (0.07″)

    Add to cart
  • Thermaltronics Soldering Tip P75CH012 Chisel 30deg 1.20mm (0.047″)

    SKU: P75CH012

    $24.40
    0 out of 5

    Thermaltronics P75CH012 Chisel 30deg 1.20mm (0.047″)

    Add to cart
  • Thermaltronics Soldering Tip P75CH016 Chisel 30deg 1.60mm (0.06″)

    SKU: P75CH016

    $24.40
    0 out of 5

    Thermaltronics P75CH016 Chisel 30deg 1.60mm (0.06″)

    Add to cart
  • Thermaltronics Soldering Tip P75WV020 Hoof w/Dent 45deg 2.00mm (0.08″)

    SKU: P75WV020

    $41.70
    0 out of 5

    Thermaltronics P75WV020 Hoof w/Dent 45deg 2.00mm (0.08″)

    Add to cart
  • Thermaltronics Soldering Tip P75CH024 Chisel 30deg 2.40mm (0.09″)

    SKU: P75CH024

    $24.40
    0 out of 5

    Thermaltronics P75CH024 Chisel 30deg 2.40mm (0.09″)

    Add to cart
  • Thermaltronics Soldering Tip P75CH030 Cartridge Tip Chisel 3.0mm

    SKU: P75CH030

    $24.40
    0 out of 5

    Thermaltronics Cartridge Tip Chisel 30° 3.00mm (0.12″) 

    Add to cart
  • Thermaltronics Soldering Tip P75CH052 Chisel 30deg 5.20mm (0.20″)

    SKU: P75CH052

    $24.40
    0 out of 5

    Thermaltronics P75CH052 Chisel 30deg 5.20mm (0.20″)

    Add to cart
  • Thermaltronics Soldering Tip P80CH052 Chisel 30deg 5.20mm (0.20″)

    SKU: P80CH052

    $24.40
    0 out of 5

    Thermaltronics P80CH052 Chisel 30deg 5.20mm (0.20″)

    Add to cart
  • Thermaltronics Soldering Tip P80CH016 Chisel 30deg 1.60mm (0.06″)

    SKU: P80CH016

    $24.40
    0 out of 5

    Thermaltronics P80CH016 Chisel 30deg 1.60mm (0.06″)

    Add to cart
  • Thermaltronics Soldering Tip P80CH024 Chisel 30deg 2.40mm (0.09″)

    SKU: P80CH024

    $24.40
    0 out of 5

    Thermaltronics P80CH024 Chisel 30deg 2.40mm (0.09″)

    Add to cart
  • Thermaltronics Soldering Tip PM80CH178H Chisel 1.0mm

    SKU: PM80CH178H

    $27.90
    0 out of 5

    Thermaltronics “P” Cartridge Tip Chisel 1.0mm

    Add to cart
  • Thermaltronics Soldering Tip PM80CP303H Cartridge Tip Conical 1.0mm

    SKU: PM80CP303H

    $27.90
    0 out of 5

    Thermaltronics “P” Cartridge Tip Conical 1.0mm

    Add to cart
  • Thermaltronics Soldering Tip PM80CH176H Chisel 1.78mm

    SKU: PM80CH176H

    $27.90
    0 out of 5

    Thermaltronics “P” Cartridge Tip 1.78mm

    Add to cart