Chemtools

1 2 3 6
  • Rapidstick™ Cyanoacrylate Adhesives Accelerator (Acetone-Based)

    SKU: 8-CAA-150

    $18.90
    0 out of 5

    Rapidstick™ Cyanoacrylate Adhesives Accelerator speeds the rate of cure of cyanoacrylate adhesives, and guarantees proper cohesion, preventing absorption into porous substrates. It is highly recommended for thick bond lines (>20mm), and for use in low temps, or in conditions of low air moisture. May be applied pre- and post-bond

    Add to cart
  • Solder Paste Lead Free SAC305 Syringe

    SKU: SAC305NC257-2S

    $15.00$45.00
    0 out of 5

    Dispensing grade lead free solder paste for surface mount loading and rework.  
    Ideal for small prototype jobs.
    Alloy: SAC305
    Ball Size: T4
    Flux Type: No Clean
    Made in Australia
    Available with plunger for hand applications or without plunger to be used in a pneumatic dispensing system.

    Select options
  • 8222 Low Strength – Purple – 50mL

    SKU: 8222-50

    $27.00
    0 out of 5

    Rapidstick™ 8222 Threadlocker is low strength, fast curing, and specifically formulated to give controlled friction and torque/tension ratio during assembly. It used for the permanent bonding and sealing of threads and retaining of cylindrical parts, and is ideal for small screws and fasteners 6mm and under – particularly those loosening under vibration.

    8222 is highly resistant to heat, water, gases, oils, hydrocarbons, and many chemicals, and is specifically suitable for applications requiring the adjustment of set screws and fasteners where easy disassembly is required. Best performance is achieved in thin bond gaps.

    8222 meets Military Specification MIL-S-46163 Type 11, Grade M.

     

    Specifications (refer to TDS for full details)

    • Colour: Purple
    • Permanent: No
    • Viscosity: 1,000 cps
    • Handling Cure Time: 20 minutes
    • Strength: Low
    • Temperature Range (°C): -55 to +150
    • Gap Filling: Up to 6mm (1/4″)
    Add to cart
  • 8242 Medium Strength – Blue – 50mL

    SKU: 8242-50

    $27.00
    0 out of 5

    Rapidstick™ 8242 Threadlocker

    Rapidstick™ 8242 Threadlocker is fast curing with medium strength and specifically formulated to give controlled friction and torque/tension ratio during assembly. It is designed for plated parts and vibrating or moving components, and is ideal for fasteners with diameters between 6mm to 20mm (1/4” to 3/4″).

    8242 provides a chemically resistant lock and seal to threaded joints, nuts, screws, and studs, meeting 90% of all nut and bold thread locking applications, and performs best in thin bond gaps. It can also be used for the retaining of cylindrical parts.

    8242 meets Military Specifications:

    • MIL-S-46163 Type II, Grade N
    • MIL-S-22473E Letter Grade CVV

     

    Specifications (refer to TDS for full details)

    • Colour: Blue
    • Permanent: No
    • Viscosity: 1,200 cps
    • Handling Cure Time: 10 minutes
    • Strength: Medium
    • Temperature Range (°C): -55 to +150
    • Gap Filling: 6mm – 20mm (1/4″ to 3/4″)
    Add to cart
  • 8243 Medium Strength – Blue – 50mL

    SKU: 8243-50

    $27.00
    0 out of 5

    Rapidstick™ 8243 Threadlocker is fast curing with medium strength for bonding and sealing threads of less active material, such as stainless steel and plated parts. It is ideal for fasteners with diameters between 6mm to 20mm (1/4″ to 3/4″), and is highly resistant to heat, vibrations, water, gases, oils, hydrocarbons, and many chemicals.

    8243 locks and seals threaded joints, nuts, screws, and studs with improved oil resistance, and is specifically formulated to give controlled friction and torque/tension ratio during assembly. It performs best in thin bond gaps, and can also be used for the retaining of cylindrical parts.

    8243 meets Military Specifications:

    • MIL-S-46163 Type II, Grade N
    • MIL-S-22473E Letter Grade CVV

     

    Specifications (refer to TDS for full details)

    • Colour: Blue
    • Permanent: No
    • Viscosity: 2,250 cps
    • Handling Cure Time: 10 – 12 minutes
    • Strength: Medium
    • Temperature Range (°C): -55 to +150
    • Gap Filling: 6mm – 20mm (1/4″ to 3/4″)
    Add to cart
  • 8263 High Strength – Red – 50mL

    SKU: 8263-50

    $27.00
    0 out of 5

    Rapidstick™ 8263 Threadlocker is a fast curing, high strength, permanent compound that eliminates the need for double nutting and welding. It prevents corrosion and leakage, and has high resistance to heat, vibrations, water, gases, oils, hydrocarbons, and many chemicals.

    8263 has improved oil resistance and offers excellent curing performance on a wide variety of active and passive metals, as well as even, oily surfaces. It is ideal for fasteners with diameters of up to 25mm (1″), and fasteners used on vibrating machines or moving components, such as transmissions, engine block studs, and valve sets. It can also be used for the retaining of cylindrical parts.

    8263 performs the best in thin bond gaps, and is specifically formulated to give controlled friction and torque/tension ratio during assembly.

     

    Specifications (refer to TDS for full details)

    • Colour: Red
    • Permanent: Yes
    • Viscosity: 40 – 60 Thixotropic
    • Handling Cure Time: 10 – 20 minutes
    • Strength: High
    • Temperature Range (°C): -55 to +150
    • Gap Filling: Up to 25mm (1”)
    Add to cart
  • 8270 High Strength Fine Threads – Green – 50mL

    SKU: 8270-50

    $27.00
    0 out of 5

    Rapidstick™ 8270 Threadlocker is a fast curing, high strength, permanent compound that eliminates the need for double nutting and welding. It prevents corrosion and leakage, and has high resistance to heat, vibrations, water, gases, oils, hydrocarbons, and many chemicals.

    8270 offers excellent performance on even, oily surfaces. It is ideal for fasteners with diameters of up to 25mm (1″), and fasteners used on vibrating machines or moving components, such as transmissions, engine block studs, and valve sets. It can also be used for the retaining of cylindrical parts.

    8270 performs best in thin bond gaps, and is specifically formulated to give controlled friction and torque/tension ratio during assembly.

    8270 meets Military Specifications:

    • MIL-S-46163A Type I, Grade K
    • MIL-S-22473E Letter Grade CVV

     

    Specifications (refer to TDS for full details)

    • Colour: Green
    • Permanent: Yes
    • Viscosity: 500 – 800 Thixotropic
    • Handling Cure Time: 10 minutes
    • Strength: High
    • Temperature Range (°C): -55 to +150
    • Gap Filling: Up to 25mm (1”)
    Add to cart
  • 8290 Wicking Grade – Green – 50mL

    SKU: 8290-50

    $27.00
    0 out of 5

    Rapidstick™ 8290 Threadlocker is a fast curing, medium strength compound, which penetrates threads by capillary action. It is ideal for sealing hairline cracks, small nuts and bolts, and securing setscrews and other assemblies after settings are completed.

    8290 has high resistance to heat, vibrations, water, gases, oils, hydrocarbons, and many chemicals. It seals and welds porous metal parts, and prevents corrosion and leakage. Localised heating and hand tools are needed for disassembly.

    8290 performs best in thin bond gap. It bonds and seals fasteners on vibrating machines or moving components, and is specifically formulated to give controlled friction and torque/tension ratio during assembly. It can also be used for the retaining of cylindrical parts.

    8290 meets Military Specifications:

    • MIL-S-46163A Type III, Grade R
    • MIL-S-22473E Letter Grade AA

     

    Specifications (refer to TDS for full details)

    • Colour: Green
    • Permanent: No
    • Viscosity: 12 cps
    • Handling Cure Time: 20 minutes
    • Strength: Medium
    • Temperature Range (°C): -55 to +150
    • Gap Filling: Up to 6mm (1/4″)
    Add to cart
  • 8401 Instant Adhesive 25ml General Purpose

    SKU: 8401-20

    $12.00
    0 out of 5

    Rapidstick™ 8401 Cyanoacrylate Adhesive is specifically formulated to bond difficult surfaces with high industrial strength. It is ideal for a wide variety of industrial manufacturing and repair applications that have rough, porous, or acidic surfaces.

    Common bonding surfaces include balsa wood, rubbers, plastics, metals, ceramics, and leather.

    8401 meets Military Specification MIL-A-46050 Type II, Class II.

    A direct alternative to Loctite 401

    Specifications (refer to TDS for full details)

    • Appearance: Clear Liquid
    • Composition: Ethyl Cyanoacrylate
    • Viscocity: Medium
    • Cure Speed: Fast
    • Strength: High
    • Gap Filling: Up to 0.20 mm
    • Temperature Range (°C): -60 to +80
    Add to cart
  • 8406 Instant Adhesive 25ml Low Visc

    SKU: 8406-20

    $12.00
    0 out of 5

    Rapidstick™ 8406 Cyanoacrylate Adhesive is ideal for a wide variety of manufacturing and repair applications requiring a reliable, high strength, industrial bond. It is specifically formulated for tight-fitting insensitive surfaces which are rough, porous, or acidic.

    8406 is commonly used for bonding wood, cardboard, rubbers, plastics, metals, ceramics, and leather.

    A direct alternative to Loctite 406

    Specifications (refer to TDS for full details)

    • Appearance: Clear Liquid
    • Composition: Ethyl Cyanoacrylate
    • Viscocity: Low
    • Cure Speed: Fast
    • Strength: High
    • Gap Filling: Up to 0.05 mm
    • Temperature Range (°C): -60 to +80

    Instant Adhesives – also known as Cyanoacrylate Adhesives – bond by reacting with the moisture in the air and on the surface of the material being bonded.

    Add to cart
  • 8403 Instant Adhesive 25ml Low Bloom / High Visc

    SKU: 8403-20

    $34.00
    0 out of 5

    Rapidstick™ 8403 Cyanoacrylate Adhesive offers ease of processing, eliminating the need for ventilation and reducing frosted residues in the critical cosmetic bonding of plastics, rubbers, wood, metals, and elastomeric materials. It is suitable for a wide range of industrial assemblies, and is commonly used on sensitive medical devices with latex, acrylic, and aluminium parts.

     

    Specifications (refer to TDS for full details)

    • Appearance: Clear Yellow Liquid
    • Composition: Alkoxyethyl Cyanoacrylate
    • Viscocity: High
    • Cure Speed: Fast
    • Strength: High
    • Gap Filling: Up to 0.30 mm
    • Temperature Range (°C): -60 to +80

    An alternative to Loctite 403
    Instant Adhesives – also known as Cyanoacrylate Adhesives – bond by reacting with the moisture in the air and on the surface of the material being bonded.

    Add to cart
  • 8460 Instant Adhesive 25ml Low Bloom

    SKU: 8460-20

    $34.00
    0 out of 5

    Rapidstick™ 8460 Cyanoacrylate Adhesive offers ease of processing, eliminating the need for ventilation and reducing frosted residues in the critical cosmetic bonding of plastics, rubbers, wood, metals, and elastomeric materials. It is suitable for a wide range of industrial assemblies, and is commonly used on sensitive medical devices with latex, acrylic, and aluminium parts.

     

    Specifications (refer to TDS for full details)

    • Appearance: Clear Yellow Liquid
    • Composition: Alkoxyethyl Cyanoacrylate
    • Viscocity: Low
    • Cure Speed: Fast
    • Strength: High
    • Gap Filling: Up to 0.15 mm
    • Temperature Range (°C): -60 to +80

    An alternative to Loctite 460Instant Adhesives – also known as Cyanoacrylate Adhesives – bond by reacting with the moisture in the air and on the surface of the material being bonded.

    Add to cart
  • 8408 Instant Adhesive 25ml Low Bloom / Low Visc

    SKU: 8408-20

    $34.00
    0 out of 5

    Rapidstick™ 8408 Cyanoacrylate Adhesive offers ease of processing, eliminating the need for ventilation and reducing frosted residues in the critical cosmetic bonding of plastics, rubbers,
    wood, metals, and elastomeric materials. It is suitable for a wide range of industrial assemblies, and is commonly used on sensitive medical devices with latex, acrylic, and aluminium parts.

     

    Specifications (refer to TDS for full details)

    • Appearance: Clear Yellow Liquid
    • Composition: Alkoxyethyl Cyanoacrylate
    • Viscocity: Low
    • Cure Speed: Fast
    • Strength: High
    • Gap Filling: Up to 0.3 mm
    • Temperature Range (°C): -60 to +80

    An alternative to Loctite 408

    Add to cart
  • 8444 Wire Tacking – 700CPS – 25mL

    SKU: 8444-20

    $12.00
    0 out of 5

    8444 is a colorless, transparent, medium viscosity ethyl cyanoacrylate instant adhesive formulated for electronics applications. It is designed for use with  accelerators for instant cures for tacking electronics components. It can be used for tacking wire to coil forms, tamper proofing adjustable components and mounting standoffs, edge guides and stiffeners to circuit boards.

    An alternative for Loctite 444 and the adhesive used in Loctite Tak Pak

    Specifications (refer to TDS for full details)

    • Appearance: Clear Liquid
    • Composition: Ethyl Cyanoacrylate
    • Viscocity: Medium
    • Cure Speed: Fast
    • Strength: High
    • Gap Filling: Up to 0.35 mm
    • Temperature Range (°C): -60 to +80
    Add to cart
  • Flux Remover – Circuit Board Cleaner

    SKU: CT-CBC

    $11.70$199.20
    0 out of 5

    Circuit Board Cleaner is an electrical parts cleaner and efficient benchtop flux remover, which also rinses dirt, moisture, dust, and corrosion, and rapidly cleans waxes, oils, and greases. It is fast drying and compatible with most rubbers and plastics.

     

    Circuit Board Cleaner is safe for use on PCBs, tape heads, optical and precision instruments, motors, dies, bearings, air tools, and much more.

     

    Features & Benefits:
    -Tough on all types of fluxes
    -Fast drying
    -Non corrosive
    -Low odour
    -No clean flux compatible

    Select options
  • Deflux IT Flux Remover

    SKU: CT-DF

    $14.90$305.30
    0 out of 5

    De-Flux-It G2 Flux Remover rapidly cleans a variety of soils such as waxes, oils, and greases. Its heavy duty, slow drying, solvent-based formula has the staying power to attack some of the toughest baked on fluxes, leaving little or no residue.

     

    De-Flux-It G2 is lead and lead-free compatible, non-corrosive, pleasant smelling with a low toxicity, and safe on most plastics. It is ideal for printed circuit boards and micro BGA component cleaning.

    Select options
  • DEOX R70 Electrical Protector & Conductivity Enhancer

    SKU: CT-R70

    $14.80$26.50
    0 out of 5

    DEOX R70 Electrical Protector & Conductivity Enhancer is a highly advanced, non-conductive electrical protector, extremely effective in aggressive environments and tropical
    climates, including those in the industrial and marine industries. It is safe on plastics, connectors, and PCBs, and provides excellent corrosion protection by displacing moisture and sealing and enhancing the conductivity of electrical and electronic equipment and tools, switches, contacts, relays, coils, solenoids, motors and generators,
    junction boxes, and telecommunication devices, protecting surfaces in any condition, including those which had previously undergone water damage.

    R70 protects and enhances upon application by forming a unique, thin film deposit of VCIs which do not alter or interfere with the electrical resistance or magnetic properties of metal surfaces. It also dissolves corrosion to assist with the restoration of electrical conductivity, and is a vital protective spray for use during the maintenance and servicing of electrical components.

    Select options
  • Flux Remover GP

    SKU: CT-FRGP

    $10.70$248.90
    0 out of 5

    General Purpose Flux Remover is specifically formulated to remove most types of fluxes including rosin and rosin based no-clean flux found in post-solder applications (Type R, RA & RMA). The quick penetrating and low surface tension action will easily dissolve and flush away fluxes, oils, greases, grime, dirt and other contaminants from electrical and electronic assemblies.

    Typical applications include post-wave soldering flux cleaning, printed circuit boards, component leads, connectors, gold fingers, plugs, sockets, aerospace electronics, telecommunications equipment, and avionics.

    Features & Benefits:
    -Low odour
    -Non corrosive
    -Contains no CFCs or HCFCs
    -Leaves little or no residue
    -Compatible with most rubbers, plastics and metals

     

    Typical applications include post-wave soldering flux cleaning, printed circuit boards, component leads, connectors, gold fingers, plugs, sockets, aerospace electronics, telecommunications equipment, and avionics.

    Select options
  • Premium Anti-Static Bench Matting 600mm x 10M Blue

    SKU: 23-0610-BL

    $410.00
    0 out of 5

    Okay’s Static Dissapative Matting Rolls are made from durable rubber material and guaranteed not to fade like cheaper alternatives. They are versatile, long lasting, and suitable for use as a dissapative work surface table mat which is conductive on the opposite side.

    Add to cart
  • Electronics Cleaning Solvent

    SKU: CT-ECS

    $6.20$258.90
    0 out of 5

    Electronic Cleaning Solvent is a fast drying, pure and stable industrial cleaning solvent for the precision cleaning of mechanical assemblies and sensitive electronics, including printed circuit boards, and circuit breakers. Its highly efficient formula is non-corrosive, leaves no residue, and is harmless to most plastics, elastomers, and rubbers.

     

    Electronic Cleaning Solvent rapidly removes fluxes, waxes, greases, and oils, and can also be used on relays, switches, alarms, contacts, connectors, generators, and terminal plugs.

    Select options
1 2 3 6